Automatic Temperature Setting - IVAR EQUICALOR DC 1010 Manual De Instrucciones

300546US-10-14
 AUTOMATIC TEMPERATURE SETTING
Enable Automatic Mode (Automatic Mode)
[ MENU
à à
MODE AUTOMATIC MODE
If Automatic mode is enabled, the chronothermostat
follows a weekly schedule to control the system.
It is therefore possible to set, for each of the 7 days,
during which time bands to offer the Comfort (T1), Sav-
ing (T2) or Limit (T3) temperature.
Access the Mode section and select Automatic Mode us-
ing the Up/down arrows (See 'Menu Navigation' on pg.
6 for further instructions).
Then press ENTER twice, to activate the option.
Winter/Summer Mode
[ MENU WINTER/SUMMER MODE ]
à à
SETTINGS
Enables the system to control heating and cooling, giv-
ing priority to the winter set or summer set, respectively
(For information on the sets see the following para-
graphs).
Access the Winter/Summer Mode
arrow to select Winter or Summer, then press ENTER.
FIG.
7-DAYS SCHEDULE GRAPH
4
(EXAMPLE)
3 6 9 12
LINE 1 – e.g.: 68°
LINE 2 – e.g.: 65°
LINE 3 – e.g.: 62°
In this example, the temperature will be 68 degrees
from 18:00 to 20:00, 65 degrees from 20:00 to 21:30
and 62 degrees from 21:30 to 24:00.
[9]
ENABLE AUTOMATIC MODE ]
à
and use the Up/down
15 18 21
For help see 'NAVIGATION MAP' on pg. 22
'Winter Set' and 'Summer Set'
[ MENU WINTER SET ]
à à
SETTINGS
[ MENU SUMMER SET ]
à à
SETTINGS
To define the 3 temperature ranges into which the in
7-DAYS Schedule Graph is divided, proceed as follows
(the 3 ranges are represented by the horizontal lines of
the graph; see Figure-4 and 'Managing the temperature
sets' on pg. 23).
Access the Winter Set section or the
tion depending on the mode you wish to work in (see
'Summer/Winter Mode'). Use the
the required field and then press ENTER.
Using the Up/down arrows, select
tomize temperature T1, Set saving
for T3. By appropriately adjusting the Saving and Limit
temperatures, the user is able to perfect saving man-
agement.
Highlight a field and press ENTER. With every touch of
the Up/down arrows the temperature value increases or
decreases by 1 °F.
When finished, press ENTER.
Zones - Weekly Schedule
[ MENU ZONES ]
à à
SETTINGS
When the WINTER mode is enabled, access the
section to customize the
any zone in the home (This section lists many zones, or
rather the number defined using the 'Number of man-
aged zones' option - see pg. 19).
The initial number of zones is 2 and this can be in-
creased to a maximum of 8). Select a zone with the
18 21
CHRONOTHERMOSTAT
Summer Set sec-
Up/down to highlight
Set comfort to cus-
for T2, or Set limit
Zones
7-DAYS Schedule Graph of
Up/down arrows and press
ENTER. Using the Up/down
arrows select the day of the
week you wish to set and
press ENTER. Now use the
Left/right buttons to high-
light the time bands to be
edited (48 vertical markers
divide the day into 30 min
intervals). Then press Up/
down to assign T1, T2 or T3