Bluetooth Handfree System - Viera HA3000BT Manual De Usuario

BlueTooth Handfree System

1. Pairing
Turn on Bluetooth mode of mobile phone, then
select the function for Finding Bluetooth Device and
enter it. After finishing finding, it will show the name
of Bluetooth Device if found, select it and enter it,
then it will show an interface that asks you to input
password. Input the password 0000 and enter it.
then the LCD of the car audio systemwill display
CONNECT and BT icon.
2. Connection or disconnection
A) Use mobile phone to do connection or
disconnection
1) In connection status, find the paired and
connected Bluetooth Device, then press the
disconnection button to do disconnection.
2) In disconnection status, find the paired and
disconnected Bluetooth Device, then press the
connection button to do connection.
B) When powering on (after Acc of the car was
switched off ), the unit will search for mobile phone,
pair and connect. This will take about 10-15 seconds.
Note:
(1) Bluetooth icon appears on LCD only when in
connection status.
(2) In connection status: Mobile phone transfers to
car audio player whenever a dialling takes place;
Mobile phone transfers to car audio player whenever
receiving a call.
3. Dial and select function mode when in BT
connection status
A) Dial with mobile phone directly.
B)Press and hold BAND/T-Mbutton to change
function mode as follow:
1)RECEIVED: after the LCD of the unit display
RECEIVED, you can press the SEL to enter the
RECEIVED interface. Rotate the vol knob to display
the phone numbers you have received.
2)DIALED: after the LCD of the unit display DIALED,
you can press the SEL to enter the DIALED interface.
Rotate the vol knob to display the phone numbers
you have dialed.
3)MISSED: after the LCD of the unit display MISSED,
you can press the SEL to enter the MISSED interface.
Rotate the vol knob to display the phone numbers
you have missed.
4)PB LIST: after the LCD of the unit display PB LIST,
you can press the SEL to enter the PB LIST interface.
Rotate the vol knob to display the phone numbers of
your mobile phone.
5)TALK: after the LCD of the unit display TALK, you
can press the SEL to enter the TALK
16
interface. Rotate the vol knob to adjust the volume
level until you can hear it comfortably.
4. Accept/ Reject/ End Call
A) During ringing, press TEL button to accept the
call.
B) During ringing, press HANG UP button to reject
the call.
C) During talking, press HANG UP button to end the
call.
Note:
During ringing, PHONE appears and then the phone
number.
During talking, talking time appears.
5. Dialling or receiving calls while the unit is in sleep
mode When the car radio is in standby mode (Acc on
and Power off), when dialling or receiving a call, the
car radio will power on automatically. After the call is
completed, the radio will revert to standby mode.
6. To transfer the audio of a file played by Mobile
Phone to the Car Audio Player
If the mobile phone supports A2DP and could play
audio or video files, when the Mobile Phone plays
an audio file(For some Mobile Phones, you must first
select Play by BT ), the playback will be transferred to
the Car Audio Player.
In A2DP mode, if the Bluetooth device of the Mobile
Phone supports AVRCP, the functions of the >>|,
|<< and PLAY/PAUSE buttons are the same as one
in media mode (no fast forward/backward functions
for the >>|/|<< buttons).
The other buttons normally available in media mode
are not available.
USB/SD Android Radio