Tabla de contenido
Idiomas disponibles
Idiomas disponibles
9.
Storage
• After the drying, store the products in a box or a clean and closed bag
• Store the products in a dry place, protected from the light, between +5°C and 35°C (41°F to 35 °F)
• Let the valve closed during storage, the top compartment should not be under pressure
• Do not store the products near gasolines, oils or other chemical products
• Do not store the products in a dusty place or where there is sand
• The flexible should be free from all constraints, tank should be in a vertical position, valve to the top
During storage, remove the first stage regulator from valve
•
10. Maintenance and upkeep
• The proper functioning and the proper preservation of your equipment do not necessarily depend on its frequency of
use. Even when it is not used, a bad storage can significantly damage the device
• Make your MiniDive Pro (Pro+, Carbon) regularly inspected by a specialist, an annual inspection is recommended
• The French law impose inspection or obligatory re-test for the MiniDive Pro+, Carbon every 2 years. It is not
mandatory but recommended for the MiniDive Pro (inquire by country)
• The French law do not impose inspection or obligatory re-test for the pressure regulator but it is advisable (inquire by
country)
• Unscrew the pump filter (black sheath) and heat it up at 50°C (122°F) during 20 minutes every 10 full filling of the tank
(every 5 full refill in wet locations)
• It is recommended to replace the M4S pump filter every 30 refills
• It is possible that after a certain number of refill, the movement of the pump becomes harder, apply silicon grease in
small quantities on the metallic tube of the pump
• Prefer the replacement of a defective piece by an original one
• If there is a leak in the 1
• Do not try to fix your equipment by yourself else-way than by the instructions given in this manual
• Do not forget that your security and the proper functioning of your equipment depend on its maintenance
• For the upkeep of your regulators and your tank, consult a diving center
• If you need help about use or repair of the product, check our tutorials on youtube.com/minidive
• A FAQ is also available for all products on minidive.com
11. Warranty
• The equipment is guaranteed for one year starting from the date of purchase of the products
• The guarantee is only valid for the first owner of the equipment
• In case of claim for guarantee, you will have to have a proof or purchase delivered by your dealer
• This guarantee is only valid for « defective » pieces due to a manufacturing fault
• A non-followed maintenance can engender a guarantee cancellation
• The guarantee does not cover the damages caused by a faulty use or by carelessness like it is said in this present
document
• The guarantee does not take in charge the « normal » usury of the productsThe guarantee does not include the
recommended periodic inspectionsThe guarantee is invalidated if the equipment has been disassembled in a different
way from this guide
• In a case of modification of the product by a qualified person, he or she undertakes the responsibility of the repairs/
changements done on the product
• The guarantee is available for the repair or the replacement of a piece by MiniDive, the freight charges and the packing
costs are on the buyer
• The exchanged pieces are MiniDive's goods. These new replaced pieces cannot extend the guarantee of the product
in any case
• The responsibility resulting from the sale is limited to the described guarantee above. It excludes the possibility to use
penalties, damages and interests
• The rules is apt to change according to the territories at a later writing date of the manual, an adaptation can be
necessary
• Every modification of the product involves the loss of the guarantee and can involve risks during the use
• Do not interchange the pieces between other equipments or your guarantee can be cancelled
• To benefit from the guarantee, please contact your dealer
st
stage, tighten the MP output with your hand and the DIN connection with a Allen key
and protect the output with the cap included
9
Capítulos
Tabla de contenido
