To Clear Calibration; To Select A Different Language - AgraTronix 08150 Manual De Instrucciones

TO CLEAR CALIBRATION

1. Select grain to clear.
2. Press CAL button (A), tester will then
display last calibration that was made.
3. Press CLEAR button (B).
4. Tester will then display 0.0% for
both lines if the calibration has
been cleared.
NOTE: If you press the CAL button
and tester displays 0.0% on both
lines, then no calibration has been
made for this grain.

TO SELECT A DIFFERENT LANGUAGE

1. At start up, the tester will always display the name of the last grain tested in the
current language selected. (English is the default language from the factory.)
2. To select a new language, press either the up or down arrow on the SELECT
button (A) to index forward or backward through the grain (function) menu
until the word LANGUAGE is displayed.
3. When LANGUAGE is displayed, press
TEST button (B). The current language
selected will be displayed. Press either
the up or down arrow on the SELECT
button (A) to index forward or backward
through the grain language menu until
your choice of language is displayed.
The seven (7) languages (as displayed)
are: ENGLISH, SPANISH, GERMAN,
FRENCH, ITALIAN, SWEDISH and
PORTUGUESE.
4. Press TEST button (B) again to return to
the main grain menu, which will now be displayed in the new language.
Operation
11