Packaging Inspection; Operating Conditions; Requirements And Procedures - Astralpool EF Serie Manual Tecnico

10. PACKAGING INSPECTION

This equipment is packaged using RECYCLABLE MATERIALS which can withstand even the
most difficult transportation conditions. Nevertheless, an inspection of the packaging should be
done in order to check for any damages and to avoid incorrect operation of the equipment.
TALLERES DEL AGUA will not be held responsible in this case.
¡WARNING!
IT IS VERY IMPORTANT TO KEEP THE PACKAGED EQUIPEMENT UPRIGHT AS THE
PACKAGING HAS BEEN DESIGNED FOR THIS. ALWAYS MAINTAIN IT IN A VERTICAL
POSITION.
IF THE UNIT IS DAMAGED, OR THE CONSIGMENT IS INCOMPLETE, MAKE A NOTE OF
IT ON THE CARRIER'S BILL OF LADING AND INMEDIATELY MAKE A CLAIM TO THE
COMPANY IN CHARGE OF SHIPPING.
The package includes the following elements:
• AIR WATER cooler EF.
• Owners Manual.
• Warranty.

11. OPERATING CONDITIONS

Water physical and chemical parameters must be in between:
PH
Residual Cl
Alkalinity
Solids
Ca
Normal ambient conditions for operation are:
Inlet outdoors air Temp.
Inlet water Temp.
Outlet water Temp.
Limits established for working conditions in order to guarantee the proper operation of the
equipment are:
Inlet water maximum Temp.
Inlet water minimum Temp.
Inlet outdoors air maximumTemp.
Maximum inlet wáter pressure
The operation conditions will affect the equipment performance.

12. REQUIREMENTS AND PROCEDURES

•
Ensure that the place where this equipment will be placed is resistant enough to withstand
the total weight of the equipment.
© TALLERES DEL AGUA S.L. 2008. TODOS LOS DERECHOS RESERVADOS. DOCUMENTO CONFIDENCIAL Y EN PROPIEDAD.
7,2 a 7,8
1 a 2 ppm
80-125 ppm
</=3000 mg/l
200-300 ppm
35º C
12º C
7º C
20º C
5º C
40º C
3,5 bar
ENGLISH
Page 38 of 50