Positioning; Electrical Connection; On And Off - Frucosol SH-3000 Manual De Instrucciones

2.- POSITIONING

To guarantee a good operation, place the machine in a completely plane place
Once placed the machine, activate the brakes of the front wheels to avoid any
displacement. Disable the brakes every time the machine be moved. Only for SH-
7000 Model.
Don't move the machine when it´s working.

3.- ELECTRICAL CONNECTION

AVOID ALL ACCIDENTAL GROUND STARTING. Before connecting the machine, verify
that all the elements of the machine are properly placed; otherwise it could cause a
breakdown.
CHECK THAT VOLTAGE OF ELECTRIC NETWORK is the same as the one shown in the
identification sheet of the machine.
THE CONNETION INSTALLATION should possess differential protection and own
thermal magneto, also protected upstream.
DO NOT START THE MACHINE IF THE ELECTRIC CABLE OR PLUG ARE DAMAGED.
CONNECT THE PLUG to the electric network (230 V – 220 V – 110 V)
Note: Make sure that the ground connection is propely done and according with the valid
standards.

4.- ON AND OFF

• Check that all the elements of the machine are in good position and that the
machine's plug is connected to the electric network of 230 V – 220 V – 110 V.
• The switch button is located in the right side of the machine; to switch it on press the
button in a way that the circle is in the area that stands out. (FIG. 1)
•
To stop the machine, press the switch in a way that the line is in the area that stands
out. (FIG. 1)
• To stop the machine push the button. ( FIG. 1)
FIG 1
- 2 -
.