Tabla de contenido
2
English
• 1 CD-in internal audio connector (on the Karajan audio module)
• 1 S/PDIF connector for optical cable connection
• 1 IR connector
• 8 Serial ATA connectors (for "DR" models only)
4 Serial ATA connectors (for "D" models only)
• 2 IDE connectors
• 1 floppy connector
• 1 24-pin ATX power connector
• 1 4-pin ATX 12V power connector
• 2 4-pin 5V/12V power connectors (FDD-type and HDD type)
• 1 front panel connector
• 5 fan connectors
• 4 diagnostic LEDs
• 1 diagnostic LED connector for external 4 diagnostic LEDs
display (for LANPARTY nF4 SLI-DR only)
• EZ touch switches (power switch and reset switch)
PCB
• ATX form factor
• 24cm (9.45") x 30.5cm (12")
CMOS Reloaded
CMOS Reloaded allows you to save different configurations and
when needed, allows you to conveniently restore one of these previ-
ously saved configurations.
overclockers who often go through the tiresome trial and error
process of repeatedly changing the BIOS settings to come up with
the most ideal overclocked setting. By being able to save and load
the settings, it eliminates the tedious job of remembering several
settings and/or repeatedly resetting settings during the trial process.
The settings are stored in the SEEPROM. SEEPROM is divided into 5
banks - the backup bank and the 4 user defined banks.
Auto Save Bootable Setting
This field is used to automatically save the last bootable setting from
CMOS to an area in the SEEPROM referred to as the backup bank.
To use this function:
1. Set this field to Enabled.
2. Select "Save & Exit Setup" in the main menu then press <Enter>.
3. Type <Y> then press <Enter>.
22
CMOS Reloaded is especially helpful to
Tabla de contenido
