Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Charging Steps.
Voltage (V)
Step
Current (A)
Step 1 & 2: Analyze & Diagnose
Checks the battery's initial condition, including voltage, state-
of-charge and health, to determine if the battery is stable before
charging.
Step 3: Recovery
Initializes the Recovery desulfation process (if needed) for deeply
discharged or sulfated batteries by pulsing small amounts of
current.
Step 4: Initialize
Starts the charging process with a gentle (soft) charge.
Step 5: Bulk
Begins the Bulk charging process based on the condition of the
battery and returns 80% of the battery's capacity.
Step 6: Absorption
Brings the charge level to 90% by delivering small amounts of
current to provide a safe, efficient charge. This limits battery gassing
and is essential to prolonging battery life.
Step 7: Optimization
Finalizes the charging process and brings the battery to maximum
capacity. In this step, the charger utilizes multi-layered charging
profiles to fully recapture capacity and optimize the specific gravity
of the battery for increased run time and performance. The charger
will switch to Maintenance if the battery tells the charger that more
current is needed.
Step 8: Maintenance
Continuously monitors the battery to determine when a
maintenance charge should be initiated. If the battery voltage falls
below its target threshold, the charger will restart the Maintenance
cycle until voltage reaches its optimal state and then discontinues
the charge cycle. The cycle between Optimization and Maintenance
is repeated indefinitely to keep the battery at full charge. The battery
charger can be safely left connected indefinitely without the risk of
overcharging.
1
2
3
4
5
6
7
8
Tabla de contenido
