Set Date/Time - Graf one2clean Manual De Instrucciones

Sistema de tratamiento de las aguas residuales
Ocultar thumbs Ver también para one2clean:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

4.2.2
Manual Control of the Valve using "Manual Operation"
During checks, each valve should run for at least 5 seconds, as the monitoring the current consumption of
the valves takes some time before any faults are detected.
In automatic mode, first press
By pressing on the
Pressing
allows you to turn the selected programme on and off.
The other programs can be selected using the arrow keys
Pressing
once will take you back to the display "manual mode".
4.2.3

Set Date/Time

Press
and then the arrow keys
By pressing
, the time and date can then be set using the arrow keys
To confirm the correction, you must press
Pressing
once will take you to the next display in holiday mode.
A correctly set system clock and date display is absolutely mandatory in order to record the hours of opera-
tion and so that any faults can be traced. There is no automatic change from summer to winter time.
NOTE: If you do not press any buttons for a period of 10 minutes, normal operation will begin automatically.
4. Operation of the Control System
then the arrow key
Manual operation
button again, you will receive the following message:
Aeration OFF
until the following is displayed on the screen (example):
19-12-2007 Mon
20:15:56
until the following is displayed on the screen:
.
each time.
27 / 57
.
Tabla de contenido
loading

Tabla de contenido