Sears Craftsman 580.741380 Manual Del Propietário página 9

ASSEMBLY
TO ASSEMBLE REMAINING COMPONENTS
IMPORTANT: YOU MUST ASSEMBLE WAND AND AT-
TACH ALL HOSES BEFORE YOU START ENGINE°
STARTING ENGINE WITHOUT ALL HOSES CON-
NECTED AND WATER SUPPLIED WILL DAMAGE
PUMP.
o Unravel high pressure hose and attach one end of hose
m the base of 1he spray gun (Fig. 4)° Tighten by hand°
STE P 4-
Connect high pressure
hose to spray gun
STE P 6-
Remove yellow cap from
quick-connect, connect garden hose to
quick-connect and turn ON the water.
-...
female connec_r_
IF SCREEN IS DAMAGED,, DO
NOT CONNECT WATER
HG. 6
O
HG. 4
Attach other end of high pressure hose _o the high
pressure fitting on 1he pump (Fig. 5L Tighl_n by hand.
S TE P 5- Remove
red cap from high
pressure outlet and connect high pres-
sure hose to
EIG.5
Included _th _is unit is a Quick-Connect fitting that
comes attached to Water Inlet on the pump. 'The quick-
connect includes two parts -- a Mate Connector and a
Female Connecl_r (Fig, 6). Inspect inlet Screen on
female connecl_r. Clean it if it contains debris or have
it replaced if iris damaged. DO NOTRUN THE PRES-
SURE WASHER IF THE SCREEN IS DA_,GEDo
STEP 7
-- Squeeze l]'igger to purge
pump system of air and impurities.
HG. 7
STEP 8
- Connect. adjustable nozzle
extension to spray gun.
Attach adjustable nozzle ex-mnsion by inserting it into the and of _he
spray gun and _ghtening _e black connector_
HG. 8