Product Pairing; Product Mounting Diagram - Chauvet OVATION H-265WW Guía De Referencia Rápida

EN

Product Pairing

If the Ovation H-265WW has already been paired with the W-DMX transmitter, the Signal Strength Indicator in the middle
of the LCD screen will show the strength of the signal. In this case, the Ovation H-265WW is ready to work in Wireless
mode. Pairing the Ovation H-265WW and a new W-DMX transmitter:
1. From the Ovation H-265WW control panel, go to Wireless Setting.
2. Select the Receive Reset. The Signal Strength Indicator on the Ovation H-265WW will show a ? in front of the
bars.
3. From the W-DMX transmitter, press <RESET> (the Signal Indicator on the transmitter will flash).
4. Once the transmitter has found the Ovation H-265WW, the Signal indicator on the W-DMX transmitter will
illuminate solid.
5. The Signal Strength Indicator in the middle of the LCD screen on the Ovation H-265WW will show the strength
of the signal.
W-DMX operation can be interrupted or inhibited by liquid masses between the transmitter and
receiver such as water, snow, or people. For best results, keep the area between the transmitter
and receiver clear of any liquid mass.
Mounting
Before mounting this product, read the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/

Product Mounting Diagram

Pendent Mounting
3
QUICK REFERENCE GUIDE
Safety Notes. Use at least one mounting point per product. Make sure the
Mounting Clamp
Safety Cable
Overhead Mounting
Ovation H-265WW QRG Rev. 4