Toasting Instructions; Bagel Cycle - Bella 14866 Manual De Instrucciones

Tostador de 2 rebanadas
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Toasting Instructions

1. Before toasting, make sure the crumb tray is locked in position on the bottom of the Toaster
and the toasting lever is in the UP position.
2. Make sure no bread or other objects are inside the toasting slots. Place Toaster on a flat, level, heat
resistant surface.
3. Plug the power cord into a 120V AC electrical outlet.
4. Remove all protective wrappings from food before placing into the toasting slot(s).
IMPORTANT: Avoid toasting torn bread slices or small pieces of toaster food that may get lodged
in toasting slot(s).
5. Insert bread or toaster food into the toasting slot(s).
6. Turn the browning control dial to the desired shade (1 – 6). To test toasting times for browning, it is best
to use both toasting slots; position the browning control dial between (3) and (4) medium; then adjust
each subsequent toasting to your preference.
7. Lower the toasting lever until locked into place. The automatic centering guides hold food upright
for uniform side-to-side toasting.
8. When the bread is lowered into position, the CANCEL button's halo will illuminate, and toasting will
begin.
NOTE: The toasting lever will not lock into position unless the Toaster is plugged into a 120V AC
electrical outlet.
NOTE: When toasting a single slice, the bread may be placed in any toasting slot.
NOTE: To prevent a fire hazard, never place bread over the opening of the Toaster; always place bread
into the slots.
NOTE: DO NOT change the browning selection during the toasting cycle. Press the halo lighted CANCEL
button; then turn the browning control dial to adjust. Lower the toasting lever and toast until the desired
toast color is achieved.
9. At the end of the toasting cycle, bread or toaster food will rise automatically. Use the high lift lever
to remove smaller toaster foods or breads such as English muffins.
10. Remove bread from toasting slot(s). Use care when removing toasted bread as both the toastace
and the top of the Toaster will still be hot.
IMPORTANT: Never use a fork or sharp-edged utensil to remove toast, because that may damage
the heating element or cause injury.
11. To interrupt toasting, press the halo lighted CANCEL button.
12. Unplug cord from wall outlet when not in use and before cleaning. Do not attempt to dislodge food
when the Toaster is plugged in.

Bagel Cycle

NOTE: Use the BAGEL cycle for English muffins, too!
1. Plug the power cord into a 120V AC electrical outlet.
2. Slice bagels or English muffins in half; insert one half in each toasting slot with the cut sides facing
the center of the toasting slots.
NOTE: Use either toasting slot when toasting only half a bagel or English muffin. Use slices that fit freely
into toasting slots.
3. Turn the browning control dial to the desired shade (1 – 6).
4. Lower the toasting lever until it locks into place.
5. Press the BAGEL button. Both the BAGEL and the CANCEL button's halo will illuminate,
and the BAGEL cycle will begin.
6. At the end of the BAGEL cycle, the toasting lever, bagel or English muffin will rise automatically,
and the Toaster will turn OFF.
7. Remove bagel or English muffin from the toasting slot(s). Use care as the top of the Toaster will
still be hot.
IMPORTANT: Never use a fork or sharp-edged utensil to remove toast, because that may damage
the heating element or cause injury.
8. To interrupt the BAGEL cycle, press the halo lighted CANCEL button.
9. Unplug cord from wall outlet when not in use.
6
Tabla de contenido
loading

Tabla de contenido