Technical Specifications - HQ-Power VDPLDJBAR7 Manual Del Usuario

Maintenance
 All screws should be tightened and free of corrosion.
 The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in mounting
supports, do not change the location of the connections...
 Mechanically moving parts must not show any signs of wear and tear.
 The electric power supply cables must not show any damage. Have a qualified technician maintain the
device.
 There are no user-serviceable parts, apart from the fuse.
 Refer to an authorized dealer for service and/or spare parts.
Replacing the fuse
Only replace the fuse by a fuse of the same type and rating.
1. Unplug the device's power cord from the outlet.
2. Use a flat-head screwdriver to remove the fuse holder.
3. Remove the damaged fuse and replace with the same type of fuse.
4. Insert the fuse holder back in its place and reconnect power.
11.

Technical Specifications

power supply
power consumption
LEDs
output
beam angle
field angle
dimensions
weight
stand height
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
V. 03 – 08/07/2014
VDPLDJBAR7
230 VAC 50 Hz
50 W
4 x 17 W tri-colour RGB COB LEDs
283 lx @ 2 m (per COB LED)
31°
42°
749 x 135 x 285 mm
4 kg
1.4 to 2.3 m
10 ©Velleman nv