European Regulations; Supplied Accessories; Safety Information; Transmitter - Beyerdynamic RSX 700 Manual De Instrucciones

RSX 700 WIRELESS HEADPHONE SYSTEM
Thank you for selecting the RSX 700 wireless headphone system from
beyerdynamic. Please take some time to read carefully through this manual
before using the product.
The RSX 700 wireless headphone system operates in the frequency range of
2.4 GHz. Reception is possible over a range of approximately 20 metres, even
through walls and ceilings, making it possible to move around freely within
your home or outdoors. It is possible to operate several headphones with only
one transmitter.

European Regulations

This product has been designed, tested and manufactured according to the
European R&TTE Directive 1999/5/EEC.
Following this Directive, this product can be used in the following countries:
Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Greece, Germany, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein,
Lithuania, Luxembourg, Malta, Norway, The Netherlands, Poland, Portugal,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Furthermore, this frequency range is approved in many other countries.

Supplied Accessories

This wireless headphone system includes:

1 Transmitter

1 Headphone
1 AC/DC adapter 12 V / 300 mA
1 Audio cable (3.5 mm stereo jack - 3.5 mm stereo jack)
1 Adapter cable with 2 RCA plugs, red (right) and white (left)
1 Adapter (3.5 mm stereo jack - 6.35 mm (1/4") stereo jack
1 Charging cable
2 NiMH rechargeable batteries AAA-size 1.2 V, 1000 mAh

Safety Information

• Only use the power adapter that was originally supplied with the transmitter.
Make sure that the voltage rating of the adapter
matches that of the AC mains outlet you are to use. If you connect the
adapter to the wrong voltage, you may seriously damage it.
• The power adapter must be accessible to disconnect it easily from the mains
if necessary.
• Always disconnect the power adapter when changing connection or moving
the transmitter.
• Never open electronic components! This must only be carried out by
authorised service personnel. Any such tampering by non-authorised
persons can invalidate your warranty and could be dangerous.
• Use the devices in dry rooms only. You can also use the headphone outside
in dry weather, but always leave the transmitter and power adapter inside
the house.
• Never expose the power adapter to rain or water.
16
1. Transmitter
Controls and Indicators
Top view
Power on LED is illuminated red when the transmitter is active
Channel selector to adjust the transmitting frequency
Channel display, from 0 - 7
Important: "0" also indicates a channel.
Socket to connect the power adapter to supply the transmitter
Socket to connect the charging cable
Audio input socket (mini jack 3.5 mm)
1.1

How to operate the Transmitter

Location
• Choose a suitable place near your audio source (hi-fi system, CD/DVD
player, television set etc.). To ensure noise-free reception you should not
operate the transmitter in the immediate vicinity of radio equipment, mobile
phones, microwaves or above the picture tube of TV sets or monitors.
• Do not expose the transmitter to direct sunlight or near metallic objects and
avoid placing metallic objects onto the transmitter.
Mains Connection
• Connect the cable to the socket
adapter to the mains socket. The power adapter of the transmitter can be
connected permanently to the mains supply without harming the power
adapter itself or the transmitter.
Connect the power adapter to the
mains socket
Rear view
on the transmitter and the power
Connect the power cable to
the transmitter
17