Status Functions - Promax MO-160 Manual De Usuario

USER'S MANUAL. MO-16X
The selections displayed using the rotary encoder are:
CCIR (Main west European standard)
STD L (French standard)
OIRT (East European standard)
UHF (Only the UHF part from CCIR, for faster selection)
IF Mode: By using this function, the user can select generating a COFDM signal or
a single tone. A single tone can be useful for accurate alignment or testing of
external components. The available options are:
• COFDM: Generate a COFDM DVB-T signal
• TONE MAX: Generate a single tone at the maximum level available from the
MO-16X.
• TONE RMS: Generate a single tone at an RMS level equal to the RMS level of the
modulated COFDM signal.
IP Address: Specifies the 4-byte IP address associated to the MO-16X. Default
value is 192.168.29.5
IP Mask: Specifies the 4-byte mask used by the subnet the MO-16X belongs to.
Default is 255.255.255.0
Gateway IP: 4-byte IP address of the gateway that resolves IP addresses which
are not within the subnet. Defaults to 0.0.0.0 (not used).
4.8

STATUS functions.

Error List: During the continuous operation of the MO-16X, the first 16 errors
detected are stored as a reference to identify problems. Usually, no errors are
generated, and the display should be as follows:
MENU: back PUSH: select TURN: next/prev.
NO ERRORS
But, during operation, two different kinds of errors are possible (See section "4.11
Error information"):
• Errors generated when the modulator is not locked to the selected TS input.
These are usually temporary errors related to input transport stream transitions or
invalid TS bit rates.
04/2008 Page 23