Configuring The Configurator - Vokkero GUARDIAN EUROPE Standard Guia Del Usuario

VOKKERO GUARDIAN EUROPE Standard & Plus - User Guide V2.0.0
4.3.3.

Configuring the configurator

Use this setting to adjust the screen.
In this area, you can adjust the screen lighting, calibrate the touchscreen, and lock the
configurator.
1 - Adjusting the screen lighting
Slide the cursor from left and right to decrease and increase, respectively, screen lighting.
EN
2 - Calibrating the touchscreen
The configurator touchscreen is already
calibrated in the factory; you can howe-
ver calibrate your own touchscreen if
you note a significant change in screen
detection.
To do this, carry out the following 5
steps:
Select each angle with the yellow poin-
ter, then select the circle at the middle
of the screen.
The calibration is complete.
62 / 122