Sleep Timer - Samsung UN40B7000 Manual De Usuario

Time Zone
■
Select your time zone.
This function is only available when Clock Mode is set to Auto.
N
DST (Daylight Saving Time) → Off / On / Auto
■
Switches the Daylight Saving Time function on or off.
This function is only available when Clock Mode is set to Auto.
N

Sleep Timer

❑
The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180
minutes).
Press the TOOLS button to display the Tools menu. You can also set the sleep timer by
T
selecting Tools → Sleep Timer.
To cancel the Sleep Timer function, select Off.
N
Timer 1 / Timer 2 / Timer 
❑
Three different on / off timer settings can be made.
You must set the clock first.
On Time
■
Set the hour, minute, am/pm, and activate / inactivate.
(To activate the timer with the setting you've chosen, set to Activate.)
Off Time
■
Set the hour, minute, am/pm, and activate / inactivate.
(To activate the timer with the setting you've chosen, set to Activate.)
Volume
■
Set the desired volume level.
Source → TV / USB / TV Memory
■
You can select the TV, TV Memory or USB device content to be played when the TV turns on automatically. Select TV, TV
Memory or USB. (Make sure that an USB device is connected to your TV.)
When there is only one photo file in the USB or the TV Memory, the Slide Show will not play.
N
Antenna (when Source is set to TV)
■
Select Air or Cable.
Channel (when Source is set to TV)
■
Select the desired channel.
Contents (when Source is set to USB or TV Memory)
■
You can select a folder on the USB Device/TV Memory with music or photo files to be played when the TV turns on automatically.
If the folder name is too long, the folder can not be selected.
N
If you are using two of the same type USB device, be sure the folder names are different so the correct USB is read.
N
Repeat
■
Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
When Manual is selected, press the ► button to select the desired day of the week. Press the ENTERE button over the
N
desired day and the c mark will appear.
You can set the hour, minute and channel by pressing the number buttons on the remote control.
N
Auto Power Off
N
When you set the timer on, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned
on by the timer. This function is only available in timer on mode and prevents overheating, which may occur if a TV is on for
too long time.
English - 29
Timer 1
On Time
00 00 am Inactivate
Off Time
00 00 am Inactivate
Volume Source Antenna Channel
10 TV Air 0
Repeat Sun Mon Tue Wed Thu Fri Sat
Once
L Move U Adjust E Enter R Return