Tabla de contenido
Idiomas disponibles
Idiomas disponibles
&WARNING:
TO AVOID SERIOUS
INJURY, BEFORE
PERFORMING
ANY
SERVICE
OR ADJUSTMENTS:
1. Depress
clutch/brake
pedal fully and set parking brake.
2, Place gearshift lever in neutral position.
3. Place attachment
clutch
in "DISENGAGED"
position.
4. Turn ignition key to "STOP" and remove
key.
5. Ensure the blades and all moving parts have completely
stopped.
6. Disconnect
spark plug wire from spark plug and place wire where it cannot
come in contact with plug.
TO REMOVE
MOWER
t.
Place
attachment
clutch
in "DISEN-
GAGED"
position.
2. Lower attachment
hft lever to its lowest
position.
3.
Roll belt off engine pulley (M) and belt
keepers
(G).
4.
Remove retainer spring (K), slide collar
(L) off and push housing
guide
(P) out
of bracket.
5. Remove
clutch
cable spring
(Q) from
Idler arm (R),
6. Disconnect
front link (E) from mower -
remove
retainer spring and washer.
7. Go to either side of mower and discon-
nect mower
suspension
arm (A) from
chassis pin (B) and rear lift link (C) from
rear mower bracket (D) - remove retainer
springs
and washers.
CAUTION:
After rear lift links are discon-
nected, the attachment
hit lever wlif be spring
loaded.
Have a tight grip on lift lever when
changing
position of the lever,
8. Slide mower out from under right side of
tractor,
IMPORTANT"
If an attachment
other than
the mower is to be mounted
on the tractor,
remove
the front link (E) and rear lift links
(C) from tractor and hook the clutch spring
(Q) into the cable guide
on front edge
of
lower dash.
TO INSTALL
MOWER
Ensure tractor is on levelsurface
and engage
parking brake.
1. Lower attachment
lift lever to its lowest
position.
Al_ CAUTION:
Lift lever is spring
loaded.
Have a tight grip on lift lever, lower it slowly
and engage
in lowest pos_t_on.
NOTE: Ensure mower side suspension
arms
(A) are pointing forward before sliding mower
under tractor.
2. Slide mower under tractor untit it is cen-
tered under tractor.
03042tex
21
Tabla de contenido
