Controls And Features; Operation; Cutting Height Adjustment - Ariens LM21SW Classic Manual Del Propietario - Operador

Idiomas disponibles

Idiomas disponibles

CONTROLS AND FEATURES
See Figure 4 for locations.
WARNING:
Improper operation
,_
can lead to injury. Learn what the
controls do and how they work.
Thoroughly read and understand
entire Operator Manual.
Handlebar
Adjust handlebar to a safe and comfortable
height. See HANDLEBAR HEIGHT on
page 20.
Recoil Starter Handle
When pulled, handle will turn engine over.
CUTTING
HEIGHT
ADJUSTMENT
CAUTION:
AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
Engine/Blade
Control
CAUTION:
Check function of
,_
Engine/Blade
Control regularly.
Improper function of control could
cause injury.
The engine/blade
control must be held
against the handlebar to start the engine and
blade.
Engine/blade control feature on mower stops
engine and blade within 3 seconds whenever
operator releases handlebar. Check this
feature frequently. If feature fails to operate,
disconnect spark plug wire and adjust or have
it repaired before using unit.
STOP
START and RUN
DANGER: Avoid injury from
,_
rotating blade.
ALWAYS shut off engine before
adjusting cutting height.
CAUTION:
On self-propelled
models, both rear wheels must be
set at same height or traction
drive may not work properly.
Notch
Cut grass length
LOW
1" (25 mm)
2
1-3/8" (35 mm)
3
1-3/4" (45 mm)
4
2-1/4" (57 mm)
5
2-3/4" (70 mm)
HIGH
3-1/4" (83 mm)
GB- 11

Capítulos

loading

Este manual también es adecuado para:

Lm21s classicLm21 classic911160911182911183911184