Attila PRF 960 Instrucciones De Uso página 117

IGNITION OF THE OVEN BURNER
ATTENTION: Never turn the thermostat
before pressing the ignition button or
before approaching a flame to the hole
"A" of the floor of the oven.
The oven door must be open during
this operation.
To ignite the oven burner:
1 – Open the oven door to the full
extent.
WARNING: Risk of explosion! The
oven door must be open during
this operation.
2 – Lightly press and turn the thermo-
stat knob anti-clockwise to max
position (fig. 4.2), then press the
knob firmly until the burner lights.
Never continue this operation for
more than 15 seconds. If the
burner has still not ignited, wait
for about 1 minute prior to repeat-
ing the ignition.
To light the oven burner manually,
approach a flame to the hole 'A' of
the oven floor fig. 4.3.
3 – After lighting the burner, wait a few
seconds before releasing the knob
(until the safety valve stays open).
4 – Gently close the oven door and set
the oven control knob to the
required temperature.
Fig. 4.3
A
Fig. 4.2
If the flame extinguishes for any reason,
the safety valve will automatically shut
off the gas supply to the burner.
To re-light the burner, first turn the oven
control knob to position
least 1 minute and then repeat the
lighting procedure.
ATTENTION: Never turn the thermostat
before pressing the ignition button or
before approaching a flame to the hole
"A" of the floor of the oven.
, wait for at
117