Countdown Timer - Caframo Compact Digital Stirrer Manual De Usuario

Clockwise Mixing
Turn the stirrer on by pressing the power button. The display will read 40 rpm and
the speed LED dot will be illuminated. Increase to the desired speed and press the
start/pause button. The stirrer will start turning in a clockwise direction. The speed
LED dot will be illuminated (solid) and the speed value in rpm will be displayed.
Counter Clockwise Mixing
Set by following the clockwise stirring instructions above. Press the reverse button.
The reverse button can be pressed while the stirrer is running to mix in a counter
clockwise direction. The LED dot above the reversing icon will be illuminated (sol-
id) when mixing in a counter clockwise direction.

Countdown Timer

Turn the stirrer on by pressing the power button. Set the desired speed by pressing
the "+" button. Press the multifunction button until the LED dot for time is illumin-
ated. Press the "+" to set the countdown timer in minutes. Press the start/pause
button to start mixing. Press the multifunction button to toggle the display between
speed, time and cycle. Stirring stops when time is completed. Three beeps will
sound. Note: Countdown Timer value cannot be changed during operation.
xRx Agitation Cycle
Turn the stirrer on by pressing the power button. Set speed as above and count-
down timer if desired. Press the multifunction button once more until the indicator
light for cycle is illuminated. Press the "+" to set the number of seconds the impel-
ler will rotate in one direction before changing directions. Press the start/pause
button. Note: xRx Agitation Cycle value cannot be changed during operation.
For example: If set for 5 seconds the impeller will turn clockwise for 5 seconds at
the set speed then stop and change to turn counter clockwise for 5 seconds. This
pattern will continue until the pause button is pressed or until the time is completed
(if set).
The display will show the cycle seconds counting down during each direction un-
less speed or the countdown timer is selected.
When the stirrer is powered on, the default speed is 40 rpm, countdown timer is 0
minutes, and the xRx agitation cycle is 0 seconds.
The stirrer will remember the original values set for speed, the countdown timer
and the xRx agitation cycle so that when the start/pause button is pressed again
the operations will repeat.
Speed can be changed (increased or decreased) while the stirrer is running. Press
the multifunction button so the speed is displayed. Increase or decrease speed by
pressing the "+" or "-" buttons.
The countdown timer and the xRx agitation cycle can be changed only when the
14