Panel Mounting; Electrical Wiring Diagram - RS Pro EZM-3735 Manual Del Usuario

2.3 Panel Mounting

1-Before mounting the device in your panel,
make sure that the cut-out is of the right size.
2-Insert the device through the cut-out. If the
mounting clamps are on the unit, put out them
before inserting the unit to the panel.
2.4 Removing from the Panel
3

4. Electrical Wiring Diagram

1
2
1-Pull mounting clamps from left and right fixing
sockets.
1
2-Pull the unit through the front side of the panel
2
c
3
3- Insert the mounting clamps to the fixing sockets
that located left and right sides of device and make
the unit completely immobile within the panel
Before starting to remove the unit from
panel, power off the unit and the related
system.
Digital Input
Pause
Supply Voltage Input
V
230V
N
V
L 115V
V
24V
10..30 V
Must be determined in order.
Relay Output
3
( %15) 50/60Hz ±
( %15) 50/60Hz ±
( %15) 50/60Hz ±
Z
5