Lock Function For Children; Memory Function - Telstar TMD011420MD Manual De Instrucciones

MICROWAVE OVEN
TMD011420MD

18. LOCK FUNCTION FOR CHILDREN

Lock: In waiting state, press " STOP/Clear " for 3 seconds, there will be a long "beep" denoting the entering
into the children-lock state; meanwhile, screen will display " ----- ".
Lock quitting: In locked state, press " STOP/Clear " for 3 seconds, there will be a long "beep" denoting that
lock is released.

19. MEMORY FUNCTION

(1) Press "0/Memory" to choose memory 1-3 procedure. The screen will display 1, 2, 3.
(2) If the procedure has been set, press " START/ +30 SEC." to use it. If not, continue to set the procedure. Only
one or two stages can be set.
(3) After finishing the setting, press "START/ +30 SEC." once to save the procedure. If press " START/ +30 SEC."
again, it will start cooking.
Example: To set the following procedure as the second memory, that is memory 2.
To cook the food with 80% microwave power for 3minutes and 20 seconds.
The steps are as follow:
a. In waiting state, press "0/Memory" twice, stop pressing until the screen displays "2".
b.Press "Time Cook" once, then press "3", "2", "0" in order.
c. Press "Power" once, "PL10" displays, then press "8" and "PL8" displays.
d. Press "START/ +30 SEC." to save the setting. Buzzer sounds once and "2" displays. If you press "START/+30SEC."
again, the procedure will be saved as the memory 2 and operated.
e. If you want to run the saved procedure, in waiting state, press "0/Memory" twice, screen displays "2", then
press "START/+30SEC." to run.
37