Quick Set Temperature; Adaptive Function; Manual Mode - OJ Electronics UCG Guia De Inicio Rapido

Type UCG/UDG
SET TEMP
PROGRAM
At work
Morning
Hour Minutes
Please note: The following description illustrates an example in which
settings are made for the daily events in a 5:2 program.
8 Press the Up or Down buttons to set the required temperature.
9 Press the OK button. The symbol for the next event (e.g. at work)
will now flash, allowing you to set the time and temperature for this
period of the day by repeating steps 5-9.
10 Once time and temperature have been set for the four events
applicable for the 5-day period Monday to Friday, the first event
symbol for the next 2 says, SAT SUN, will then flash. Please note that
now only two events (Day and Night) are displayed.
11 Set the time and temperature for this event, and for the following
event, by repeating steps 5-9.
12 Once time and temperature have been set for the two events appli-
cable for the 2-day periode Saturday and Sunday, the setup will
return to the main menu with PROGRAM flashing.
SET TEMP
PROGRAM

Quick Set Temperature

I want to permanently change the temperature for the event cur-
rently active in the automatic program.
To do so, you must:
1 Press the Up or Down buttons to set the required temperature for the
event currently active.
2 Press the OK button.
EXIT
MON TUE WED THU
FRI
5-day period
EXIT
SAT SUN
© 2012 OJ Electronics A/S
The new temperature setting will then be saved and used for this event in
the future.
Example: If you change the temperature on a Tuesday morning while the
thermostat is running a 5:2 program, the new temperature will apply to all
mornings from Monday to Friday.

Adaptive Function

I want to ensure that the required temperature has already been
At home
reached when I get up in the morning or come home from work.
To do so, you must activate the adaptive function:
1 With Active Display (backlight on) press OK to activate the menu.
Night
2 Press the Up or Down buttons until the SETTINGS option flashes.
3 Press the OK button.
4 Press the Up or Down buttons until the ADAPTIVE option flashes.
5 Press the OK button. ON or OFF will now flash in the upper part of
the display.
6 Press the Up or Down buttons until ON flashes.
7 Press the OK button.
8 Follow the Exit Menu procedure to exit the menu.
Please note: The adaptive function is only related to the 4-event program
and only works in connection with going from one event to another where
the temperature is going to be raised.
The adaptive function calculates when the thermostat must start the
heating system to ensure that the required temperature is reached at the
set time. Three days after the adaptive function has been activated, it
has learned when the heating must be switched on to attain the required
temperature.
Factory setting: ON
SETTINGS

Manual Mode

I want to temporarily cancel the automatic 4-event program and
manually select temperature.
To do so, you must use manual mode:
1 With Active Display (backlight on) press OK to activate the menu.
2 Press the Up or Down buttons until the MODE option flashes.
3 Press the OK button.
4 Press the Up or Down buttons until MAN. MODE flashes in the upper
part of the display.
5 Press the OK button. The temperature will begin to flash.
6 Press the Up or Down buttons until the required temperature flashes.
7 Press the OK button.
TIME
DAY
CHILDLOCK
C°/F°
APPLICATION
OFFSET TEMP
READOUT
ADAPTIVE
DISPLAY
FACTORY RESET
EXIT
English
3