Tabla de contenido
care and maintenance
This product has been made with resistant materials of the
highest quality. With correct care and maintenance you will
be able to enjoy it for many years. However, dirt or other
contaminants and bad use could damage it.
METAL PARTS (STRUCTURE)
For the optimal conservation of pieces manufactured
in steel, especially if they are exposed to the elements,
periodic maintenance is advised.
For maximum resistance to corrosion, steel surfaces must
always be kept clean. This maintenance must be tailored
to the conditions to which your product is exposed (dust,
dirt, humidity in combination with heat, salty or potentially
corrosive environments, etc.). This can vary from one to
four times a month, in normal settings, or up to once a day
in cases of unhygienic or very rough conditions.
You must be the one who adjusts and evaluates the peri-
odicity of the maintenance according to how the material
reacts, increasing or reducing it depending on what is
necessary for proper product care. In any case, we recom-
mend cleaning it at least once a week, as a starting point
Therefore, it's important to keep the product clean.
Please follow these simple instructions to keep the product
in good condition:
• For cleaning both steel and stainless steel, use only
a cloth dipped in warm water and mild soap. Never use
abrasive soaps or detergents, as they can leave scratches
and produce discolouration.
• Rub gently with a damp cloth. Rinse and wring the cloth
frequently, to keep it moist. Make sure to rinse well and dry
with another cloth.
• If the surface is glossy, you must wash it along the grain,
to avoid scratching the surface. On polished surfaces,
you must previously remove dust to avoid scratching the
surface.
• If the event of a spill, clean the stain as quickly as
possible.
• If you are unable to remove the stains with a damp cloth,
apply a metal cleaner to the surface with a cloth. Read the
instructions for the cleaner carefully, and test it first on
an inconspicuous spot. Make sure to rinse well and dry
with another cloth.
When the product is extremely dirty, with stains,
incrustations, or signs of surface discoloration due
to long periods of neglect, or poor maintenance, we
recommend contacting professionals to restore the
surface's initial appearance.
IROKO WOOD (LEGS)
As a natural material, iroko can vary in colour, or even
crack due to humidity and sudden changes in tem-
perature. Exposed to the elements, iroko undergoes a
natural oxidation process that affects its colour, taking
on an attractive silver- grey tone.
Iroko pieces should be treated with a waterproof sealer
to protect them from moisture and stains (provided
they are cleaned immediately). However, this sealant
naturally vanishes over time.
We recommend treating the wood with sealant every
three months, or more frequently at dining and
hospitality establishments. To restore iroko's original
appearance, sand the entire surface and apply the seal-
ant, following the manufacturer's instructions.
Never use soaps or abrasive detergents, or furniture
cleaning products containing wax, as these types of
products form a sticky layer on the surface that attracts
dirt.
WALNUT OR OAK WOOD (LEGS)
In RS Barcelona we use and select top quality natural
woods. Walnut, oak or beech are natural woods for
indoor use only. Natural woods are high quality woods
that bring an attractiveness to the pieces and a long
life.
But they require good maintenance and proper care so
that they always look like new.
• Avoid giving hard blows and if you deposit some glass
that can leave marks, dry it quickly with a cloth.
rs-barcelona.com
• Do not place hot pans directly on the wood, since heat
will damage the surface, alter its colour and shine. Always
use place mats or coasters.
• Clean the dust frequently.
• Clean with a cloth dampened in warm water and mild
soap and dry it fast with another cloth.
• Always clean gently in the direction of the grain.
• Never use abrasive soap or detergent, sandpaper or
steel wool since they could scratch the surface or make
colours fade.
• Never use furniture polish which contains wax, since
these kinds of products tend to leave a sticky layer on the
surface which attracts dust and dirt.
• Water and moisture can also damage these woods, so try
to keep them as far away as possible from these elements.
CLOTH
To enjoy your upholstery textile for a long time, cherish it
and use it properly. Keep your textile as clean as possible.
Make sure it is cleaned regulary usin a vaccum cleaner
set to medium to low power and clean with a brush or dry
cloth.
Do not clean with any type of liquid, not even water as it
may lose the colour of the dye
Tabla de contenido
