Replacing The Batteries - Spectroline CLARITY 365 Serie Manual Del Operador

REPLACING THE BATTERIES

The 3 C batteries will deteriorate from repeated use. Turn the flashlight upside
down and twist off the tail cap counterclockwise. Remove the tail cap from the
flashlight, and then replace with fresh C-cell alkaline batteries.
NOTE: Be sure to use genuine CLARITY 365 (SPN-CLR-BA/SPN-CLR-BHA) replacement
parts. Using another manufacturer's replacement parts could affect product performance
and will void the warranty.
MEASURING UV-A INTENSITY
To ensure that your CLARITY 365 flashlight is operating at the required UV-A intensity, it
should be checked periodically. The AccuPRO™ XP-2000 combines the functionality of
a UV and visible light radiometer/photometer, and is specially designed to measure UV
irradiance with wavelengths of 320–400nm (with peak at 365nm) and visible light from
460–675nm (with peak at 555nm). Other suitable meters include the AccuMAX™ XRP-3000
radiometer/photometer kit, using dual-wavelength UV-A and VIS sensor detectors to
accurately measure the irradiance of a light source. The AccuMAX™ XR-1000 digital readout
unit with the XS-365 UV sensor or the DM-365XA digital readout unit can also be used for UV-A
measurement.
WARRANTY
The warranty policy for the CLARITY 365 flashlight is provided on the Certificate of Limited
Warranty enclosed separately with each unit. The part number and serial number for your
item is located on the inside of the tail cap.
SHIPPING
Please be prepared to provide the model number and serial number of the unit when you
contact the Customer Service Department at Spectro-UV. Carefully pack the unit in the
original shipping and packing material. Ship the unit prepaid to the factory and reference
your Spectro-UV Return Material Authorization number on all paperwork. Be sure to insure
the unit for full value.
3