STEP 2B
CAUTION:
Avoid potential personal injuries and property damage!
●
Mount the wall plate
16
●
Minimum solid concrete thickness: 8 in. (203 mm)
●
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
●
Minimum horizontal space between fasteners: 24 in. (610 mm)
NOTE: All six fasteners must be used. Evenly distribute the top four fasteners
●
For concrete applications, arm
1.
Position the wall plate
NOTE: For assistance in determining wall plate location, see Height Finder at sanus.com.
2.
Drill six pilot holes using a 3/8 in. (10 mm) diameter drill bit.
IMPORTANT
: Pilot holes must be drilled to a depth of 4 in. (101 mm). Never drill into the mortar between blocks.
1
6X
EVENLY
DISTRIBUTE
TOP FOUR
HOLES
Min. 24 in. (610 mm)
12
Solid Concrete or Concrete Block Installation
directly onto the concrete surface
(STEP 3) must remain centered in wall plate
22
on the wall at your desired height. Level the wall plate and mark the six hole locations, four on TOP / two on BOTTOM.
16
. Keep this in mind when selecting the wall plate location
16
2
6X
16
4 in. (101 mm)
3/8 in.
(10 mm)