Getting Started; Unpacking The Watch; Turning On The Watch (First-Time Use Only); Batteries - Oregon Scientific VIBRA Trainer Fit Manual De Usuario

GETTING STARTED

UNPACKING THE WATCH

When you unpack your VIBRA Trainer Fit / VIBRA Trainer Fit Pro
watch, make sure to keep all the packing materials in a safe place,
in case you need to later transport or return the product for
servicing.
In this box, you will find:
• Watch
• Heart rate chest belt
• Mounting bracket
• Carry case
• 2 x CR2032 lithium batteries - already installed

TURNING ON THE WATCH (FIRST-TIME USE ONLY)

Press any key for 2 seconds to activate the LCD display.

BATTERIES

The VIBRA Trainer Fit / VIBRA Trainer Fit Pro uses two CR2032
lithium batteries, one for the watch and another for the heart rate
chest belt. Both are already installed. See the table below for
battery warnings.
LOW BATTERY ICON
The batteries typically last one year. We highly recommend that
you contact the retailer or our customer service department if you
need to replace them.
DESCRIPTION
The battery is too low to run the
backlight
The battery is too low to run the
vibration alert
The watch battery is low; the
vibration alert and backlight cannot
be used
The chest belt battery is nearly too
low to send a signal to the watch
8