Opex Falcon+ Manual Del Operador página 180

4.3.10. Deleting Items From The Batch
When the machine is stopped, you can delete items from the batch. Click the
Delete button to delete an item image.
Note: The Delete button will only be present if activated in the current job.
The action of the Delete button depends on the setting of the Allow Delete batch
parameter:
• If the parameter is set to Delete Last Item, you will only be able to delete the
most recently scanned item image from the batch. Press Delete to delete
the last image.
• If the Allow Delete parameter is set to Delete To End Of Batch, you can also
choose an item thumbnail and delete the selected item and all the items
scanned after the item. When the Delete button is pressed, the Confirm
Delete window (Figure 4-48) will appear.
Note: Starting with CS4.0 and up, it is possible to delete individual images/
snippets. If you wish to delete an image from the middle of the batch, stop the
run, right click on the image you would like to delete, and then select Delete in
the menu. In order to do this the batch parameter "Editing Option While
Scanning" must be set to "Full Advanced editing."
4.3.11. Starting a New Batch
There are several ways to start a new batch, such as:
• Press the New Batch button while the job is running to begin a new batch
with the next scanned item.
• Press the Close Batch button, then scan the new batch ticket or the first
item of the new batch.
• Scan a batch ticket (if the New Batch Mode Job parameter is set to Auto).
Note: The New Batch button will only be available if activated in the batch
parameters.
90
Figure 4-48: Confirm Delete
Falcon+ Operator Manual
OPEX Corporation
Operation