Optional Accessories; Shackles; Swivel Hooks; Installation, Use And Uninstall - Tractel dynafor LLZ2 Serie Manual De Empleo Y De Mantenimiento

5�2� Optional Accessories
5�2�1� Shackles
To install dynafor™LLZ2 in a traction line, every shackle in compliance with applicable legislation may be used
provided that it complies with the maximum working capacity of dynafor™LLZ2.
See Figure 4
MWC
LLZ2
1 t and 3.2 t
6.3 t
12.5 t
20 t
5�2�2� Swivel hooks
The dynafor™LLZ2 can be fitted with swivel hooks that facilitate the fastening of loads.
See Figure 5
LLZ2
1 t and 3.2 t
GB
6.3 t
12.5 t
20 t
6� INSTALLATION, USE AND UNINSTALL
"DANGER": Product adjustment must only be performed by a qualified technician. The User shall ensure that
6�1� Installation
During installation you must:
a) ensure adequate resistance of the anchorage points of the load line in relation to the force that will be applied.
b) ensure the compatibility of anchoring accessories both ends of the dynamometer and compliance with
applicable regulations.
c) properly lock the shackles, by tightening their pin to the limit and ensure the presence and good working of
the safety latch hook.
d) respect the alignment of the sensor in the force line.
6�2� Operation
Use dynafor™LLZ2 only in traction.
The device can be used in all directions including horizontally.
The dynafor™LLZ2 operates correctly in a temperature range of -20 °C to +50 °C. For use beyond these
temperatures, you must provide a thermal protection device.
See Figure 6
6�3� Uninstalling
When uninstalling the device, first make sure that any tractive strain has been eliminated.
22
Shackle
A
MWC mm
3.25 t
42 6.5 t
58
13.5 t
89
25 t
110
Type
A B
A 26 33
B 33 48
C 60 70
C 72 86
the operator has taken note of this instruction, usage and maintenance manual before using the
device.
B C
mm mm
16 60
22 84
35 132
50 178
C D E
185 20 32
277�5 25 50
320�5 41 58
387 50 76
D E
mm mm
20 27
25 37
38 57
50 73
F G H
49 118 43
74 166 70
80 213 85
104 270 110
kg
0�6
1�4
4�4
14
kg
I
23 3�2
35 9�6
42�5 17�4
55 31�5