WEBTEC HPM6000 Guía Rápida De Inicio página 11

Note
This quick guide describes the initial operating procedure and the procedure for starting
and stopping measurements. It also describes how to connect analogue and CAN sensors
to the measuring instrument.
This quick guide is only a partial excerpt taken from the manual for the measuring
instrument. Be sure to carefully read the entire manual before starting to use the
measuring instrument.
The Rechargeable Battery
Power is supplied to the measuring instrument using either the integrated battery or an
external power supply unit.
The power supply unit can be connected to the power supply socket on the measuring
instrument. The battery is recharged by the external power supply unit.
You may use the measuring instrument while the power supply unit is connected and while
the battery is being recharged. The charge status is shown by a battery symbol on the
display.
If the voltage level falls below a minimal level, the current measurement is
stopped and any measured values are saved. All user parameters are saved
before the measuring instrument shuts down.
11