Please read and comply with
these instructions prior to the
initial operation of your appliance. Retain
these operating instructions for future refer-
ence or for subsequent possessors.
1 Memory block
2 Currency
3 Value
4 Output signal for value
5 Teach Mode
Selecting memory block
Switch off the power supply.
DIL switch 10 on the switchboard S1 is
OFF - L-Block (B) 0 is actvie.
DIL switch 10 on the switchboard S1 is
ON - L-Block (B1) 1 is actvie.
Lock coin channels
(also see operating panel on the coin verifi-
er)
Note
Select correct memory block (see section
"Select memory block").
The coin verifier can be programmed for 16
coin types in two independent blocks (B).
Only one block is under operation. At the
factory, the current local currencies are
programmed on B 0 and the Euro coins
with acceptance bandwith (normal) on B 1
(see type plate).
Type plate
Lock coin channels:
Set corresponding DIL switch (1-8) to
ON.
Release coin channel:
Set corresponding DIL switch (1-8) to
OFF.
The DIL switches (1-8) of the blocks S1/
S2 lock the following coin channels
Switch block S1
DIL switch
OFF ON
1
Coin channel 1
free
2
Coin channel 2
free
3
Coin channel 3
free
4
Coin channel 4
free
5
Coin channel 5
free
6
Coin channel 6
free
7
Coin channel 7
free
8
Coin channel 8
free
1
-
EN
Switch block S2
DIL switch
1
Coin channel 9
2
Coin channel 10 free
3
Coin channel 11 free
4
Coin channel 12 free
5
Coin channel 13 free
6
Coin channel 14 free
7
Coin channel 15 free
blocked
8
Coin channel 16 free
blocked
blocked
blocked
blocked
blocked
blocked
blocked
OFF ON
free
blocked
blocked
blocked
blocked
blocked
blocked
blocked
blocked
5