Gima OXY-5 Manual De Uso Y Mantenimiento página 99

99
Guidance and manufacturer's declaration-electromagnetic emission
The Fingertip Oximeter is intended for use in the electromagnetic environment
specified below. the customer or the user of the Fingertip Oximeter should
assure that it is used in such an environment.
Immunity test
Electrostatic
discharge
(ESD) IEC
61000-4-2
Electrical fast
transient/
burst
IEC 61000-4-4
Surge IEC
61000-4-5
Voltage dips,
short
interruptions
and voltage
variations on
power supply
input lines
IEC 61000-4-11
Power
frequency
(50/60Hz)
magnetic field
IEC 61000-4-8
NOTE: UT is the a.c. mains voltage prior to application of the test level.
IEC60601
test level
±6kV contact
±8kV air
±2kV for power
supply lines
±1kV for input /
output lines
±1kV line (s)
to line(s)
±2kV line(s)
to earth
<5% UT
(>95% dip in UT)
for 0.5 cycle
<40% UT
(60% dip in UT)
for 5 cycles
<70% UT
(30% dip in UT)
for 25 cycles
<5% UT (>95%
dip in UT) for 5 s
3A/m
Compliance Electromagnetic
level environment-guidance
±6kV Floors should be wood,
contact concrete or ceramic tile.
±8kV air If floor are covered with
synthetic material, the
relative humidity should
be at least 30%.
N/A N/A
N/A N/A
N/A N/A
3A/m Power frequency
magnetic fields should
be at levels characteris-
tic of a typical location
in a typical commercial
or hospital environment.