Enlaces rápidos
WARNING AND CAUTIONS:
•
TO BE INSTALLED AND/OR USED IN ACCORDANCE WITH ELECTRICAL CODES AND REGULATIONS.
•
IF YOU ARE NOT SURE ABOUT ANY PART OF THESE INSTRUCTIONS, CONSULT AN ELECTRICIAN.
PACKAGING INCLUDES: One (1) flush mount bracket and six (6) screws.
TO INSTALL
WARNING:
TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS OFF
BEFORE WIRING!
1. Flush Mounting (Figs. 1, 2 & 3):
a. Fit mounting bracket over panel as shown in Fig. 1.
b. Align panel top with non-flanged side of mounting bracket. Insert screws (provided) into mounting bracket threaded screw holes. Firmly tighten screws
until mounting bracket is secured to panel as shown in Fig. 2.
c. Mount to surface using mounting screws (not provided) as shown in Fig. 3.
Fig. 1
Surface Mounting (Figs. 4, 5 & 6):
a. From the inside of the panel, punch out the four puncture holes located at the corners of the panel's bottom, as shown in Fig. 4.
b. Insert screws (not provided) as shown in Fig. 5 and firmly tighten to mount to surface as shown in Fig. 6.
Fig. 4
2. Restore power at circuit breaker or fuse after wiring. Installation is complete.
Panel mounting brackets are suitable for the following Leviton Surge Protection devices only
Panel Mounting Instructions
For use with Series Cat. Nos. 52000 and 57000
INSTALLATION
FLUSH MOUNTING
Fig. 2
SURFACE MOUNTING
Fig. 5
52120-0M1
52240-DM3
52120-0M2
52277-0M3
52120-0M3
52277-7M3
52120-7M3
52277-CM3
52120-M2H
52277-7C3
52120-CM2
52347-0M3
52120-CM3
52412-DS3
52120-7C3
52480-DM3
For Technical Assistance Call: 1-800-824-3005 (U.S.A. Only) www.leviton.com
Fig. 3
Fig. 6
57120-0M3
57120-CM3
57240-DM3
57277-0M3
57277-CM3
57346-0M3
57480-DM3
57600-DM3
PK-93212-10-02-0B
ENGLISH
Manuales relacionados para Leviton 52000 Serie
Resumen de contenidos para Leviton 52000 Serie
- Página 1 Insert screws (not provided) as shown in Fig. 5 and firmly tighten to mount to surface as shown in Fig. 6. SURFACE MOUNTING Fig. 4 Fig. 5 Fig. 6 2. Restore power at circuit breaker or fuse after wiring. Installation is complete. Panel mounting brackets are suitable for the following Leviton Surge Protection devices only 52120-0M1 52240-DM3 57120-0M3 52120-0M2 52277-0M3...
- Página 2 Inserte los tornillos (no proveidos) como se muestra en la Fig. 5 y aprietelos firmemente para montar la superficie, como se muestra en la Fig. 6. Restablezca la energía con el interruptor de circuitos o fusible. La instalación está completa. Las Ménsulas para Montaje de Panel son sólo adecuadas para los siguientes productos de Protección de Picos de Tensión de Leviton 52120-0M1...