Korg SDD-3000 PEDAL Manual De Usuario página 25

Program change setting
When you switch programs on the SDD-3000 PEDAL, a program change message is sent from
the MIDI OUT/THRU jack, switching the program on the external MIDI device. Similarly, when
the SDD-3000 PEDAL receives a program change message, its program will switch automatically.
You can set whether a program change message will be sent from the MIDI OUT/THRU jack when
you switch programs on your SDD-3000 PEDAL.
: Program change messages will not be sent.
: Program change messages will be sent.
Setting the control change number
A MIDI control change number is assigned to the optional foot controller connected to the CONTROL
PEDAL jack. When you use the controller, the assigned control change number is sent so that the
external MIDI device connected to the MIDI OUT/THRU jacks can be controlled.
Similarly, the SDD-3000 PEDAL can be controlled when it receives the MIDI control change number
from an external MIDI device.
Note: External MIDI devices that cannot interpret the MIDI information cannot be controlled. Check
the MIDI implementation chart for the SDD-3000 PEDAL and the various devices.
: MIDI control change messages will not be sent or received.
– : Set the MIDI control change message between CC00 and CC95.
MIDI OUT/THRU function
Select the type of data that will be output from the MIDI OUT/THRU jack on the rear panel.
: MIDI control change messages, such as from the optional foot controller connected to the
CONTROL PEDAL jack, will be output from the MIDI OUT/THRU jack.
: MIDI messages that are input at the MIDI IN jack will be directly output from the MIDI
OUT/THRU jack.
25