Technical Characteristics; Safety Instructions - Aspira EVOLUTION EV Manual Del Usuario

TEChNICaL CharaCTErIsTICs

Models: EV axial Fans
EVM axial Fans with automatic shutter
rated power EV: 10/4" - 16 W; 12/5" - 20 W; 15/6" - 27 W
rated power EVM: 10/4" - 20W; 12/5" - 23 W; 15/6" - 30 W
rated Voltage: 230V~ 50hz
protection rating: Ip X4
ThaNk yOU FOr ChOOsING OUr CONVECTOrs. bEFOrE UsING IT, rEaD ThE MaNUaL CarEFULLy aND kEEp IT WELL FOr FUTUrE
rEFErENCE
1.

saFETy INsTrUCTIONs

WarNING!
read these instruction carefully in order to avoid shock hazard, fire or personal damage.
• read carefully the instructions in this booklet as they give important information on the correct installation,
• use and maintenance of the appliance. keep this booklet in a safe place so that it will be available for future reference.
• after unpacking check the integrity of the set.
• In case of doubt do not use the set and ask for a qualified person's intervention.
• all the packaging (plastic bags, polystyrene foam , nails etc) must be kept out of the reach of children.
• before connecting the appliance to the mains supply ensure that the rating label specifications correspond to your electrical supply.
• This appliance must be only used for the purpose for which it was designed i.e. room ventilation.
• all other uses must be considered to be potentially dangerous. The Manufacturer cannot be held responsible for any damage caused by
improper, incorrect or unreasonable use.
• The safe use of any electrical appliance involves the observing of certain basic rules, in particular :
• Do not touch the appliance with wet or moist hands or feet.
• Do not use the appliance with bare feet.
• Do not pull the plug from the power socket by the mains lead of the appliance itself.
• Do not leave the appliance exposed to adverse elements such as rain, salt etc.
• Do not let young children, aged or infirm people use the device without supervision.
• before beginning any cleaning or maintenance operations disconnect the appliance from the electrical supply by taking out the plug or switching
off the appliance isolation switch.
• In case of fault and/or malfunction of the appliance, switch it off but do not attempt to rectify. seek advice from a suitably qualified person.
• If repair is necessary contact the Manufacturer and ask only for original spare parts.
• If the above action is not carried out the safety of the appliance could be jeopardized.
• should it be decided not to use this appliance any longer, it should be removed from the electrical supply and rendered inoperative, then disposed
of in the normal manner.
• It is also recommended to make harmless those parts of the appliance which could be harmful, especially to children who might play with the
disused appliance.
• The installation must conform to the requirements of the latest issue of the I.E.E. wiring regulations.
• This appliance conforms to Directive: CEE 73/23+CEE 93/68, CEE 89/336+CEE93/68
• This appliance is carefully manufactured. Correct use and regular maintenance will assure a long and reliable service life.
aTTENTION:
• Installation must be carried out as detailed in these instructions.
• The user is warned that incorrect installation could cause harm to persons or animals or damage to property . The Manufacturer
cannot be held responsible in such cases.
• The apparatus is double insulated (II Class) and does not require earthing.
• Check that the current carrying capacity of the mains wiring and socket are adequate for the maximum rating of the device shown
on the rating label.
• In case of doubt consult a suitably qualified person.
• When installing, use a double pole switch with minimum contact separation of 3 mm as means of disconnection.
• Do not leave the appliance connected unnecessarily. switch off the main switch of the appliance when it is not in use.
• Do not obstruct the air inlet or outlet grilles.
• In conformity with health and safety laws in force, when installation of exhaust fan is completed, make sure that it is not at all
possible to reach moving parts from the inlet side. On the contrary it is necessary to mount the special protection shutter. (cod.
ap0034, ap0042, ap0059).
• If there is a combustion appliance in the room , it is essential to ensure that the air supply to the room is adequate for the correct
functioning of both the combustion appliance and the fan.
• Do not install the fan in the same duct where gas appliance fume is conveyed.
• The appliance must discharge into a single exhaust pipe or directly outside the building.
2. INsTaLLaTION, ELECTrICaL CONNECTIONs aND OpEraTING MODEs
1. Fig. a - This exhaust fan is suitable for installation inside a short duct for direct outdoor air exhaust.
position the exhaust fan at a minimum height 2.3m above floor level
2. Fig. b - separate the front grille (1) from the exhaust fan (2) by applying pressure to point (a) with a screwdriver.
For models with automatic locking, remove the locking diaphragm (3) as well.
remove the central cover (4) from the exhaust fan (2).
E N G L I s h
E V - E V M
9