TFA 30.3126 Instrucciones De Uso página 5

Emisor temperatura y humedad
Ocultar thumbs Ver también para 30.3126:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13
Thermo Hygro Sensor after batteries are inserted. If the reception of outdoor values fails,
"- -" appears on the display. Check the batteries and try it again. Check if there is any
source of interference. Manual initialization by pressing the ▲ button of the display unit
for 2 seconds can be helpful.
Press "°C /°F" button on the thermo sensor unit to select Celsius mode or Fahrenheit
mode for the Thermo Sensor display.
Press RESET to re-start in case of problems.
After successful installation screw up the battery compartment of transmitter carefully.
4. Positioning of transmitter
Choose a shady and dry position for the transmitter. ( Direct sunshine falsifies the
measurement and continuous humidity strains the electronic components needlessly)
Avoid the vicinity of any interfering field like computer monitors or TV sets and solid metal
objects.
Check the transmission of 433 MHz signal from the transmitter to the display unit
(transmission range 60 m free field). Within ferro-concrete rooms (basements,
superstructures), the received signal is naturally weakened.
If necessary chose another position for transmitter.
Fix the transmitter by using plastic hanger.
5. Battery replacement
When the batteries are used up, low battery icon appears at the indoor or outdoor
temperature row of the display unit.
Use alkaline batteries 1.5 V AA only. Observe correct polarity. Attention: Do not dispose
of empty batteries in household waste. Take them to special local collection sites.
6. Notes
l
Always read the users manual carefully before operating the unit.
l
Avoid placing the clock near interference sources/metal frames such as computer or TV
sets.
l
Do not expose the instrument to extreme temperatures, vibration or shock.
7. Liability Disclaimer
The product is not a toy. Keep it out of reach of children.
Improper use or unauthorized opening of housing will mean the loss of warranty.
No part of this manual may be reproduced without written consent of manufacturer.
loading