Function Operation - Sytech Easy Talk SY-1490 Manual Del Usuario

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

This function will show up in the menu but it is not supported by the SY-1490.

Reject number Setting

When the unit is on on-hook or off-hook state, press the SET/ST key and then press the DOWN/－ key three

times. The LCD will display "REJECT". Press the SET/ST key and "-"will appear on the LCD display. Press the

UP/+ or DOWN/－keys to select the sequence from 01~05 and input the reject number using the numerical

keys. Press the SET/ST key to confirm. Set the other reject numbers using the same method. You can use the

UP/+ or DOWN/－ keys to review the 5 reject numbers you have selected.

When receiving a call of one of the reject numbers, the unit will not ring but display the number and then hang

up the call.

NOTE: If the PABX code has been set and the first digit of the incoming call number is same as the PABX and

the rest of the digits are same as one of the rejected numbers, the incoming call number will also be regarded

as a reject number.

Phone book setting

When the unit is on on-hook or off-hook state, press the SET/ST key and then press the DOWN/－ key twice.

The LCD will display "PHONEBOOK INPUT". Press the SET/ST key and "INPUT NUMBER" will be displayed.

A dash as follow will flash "-". Use the digit keys to input the telephone number. Once done, press the SET/ST

key to input the name using the digit keys. The number key "0" is the backspace key. Once finished, press the

SET/ST key to confirm. Use the same method for inputting new telephone numbers and names. If the number

and name already exists in the phonebook, the LCD will display "ALREADY EXIST". While inputting a number

and name, use the UP/+ or DOWN/－ keys to move the cursor and press DEL/MUTE key to correct.

Press the BOOK/÷ key to exit.

The maximum entry for the Phonebook is up to 99.

Phonebook editing

When the unit is on on-hook or off-hook state, press the SET/ST key then press the DOWN/－ key once. The

LCD will display "PHONEBOOK EDIT". Press the SET/ST key and the LCD will display "INPUT PREFIX".

Input the name you want to review or input the first character of the name. Press the SET/ST key and the LCD

will display the corresponding name and number. If you don't input the character of the name, you can press

the SET/ST key directly, then press UP/+ or DOWN/－ keys to review the phone book entries one by one. The

edit operation is same as phonebook setting.

NOTE: The alphabet on the key button arrangement are as follow:

2ABC

4GHI

5JKL

7PQRS

8TUV

*/.