Getting Started; Language Setting - Sytech Easy Talk SY-1490 Manual Del Usuario

space 0
0
#
#/=

GETTING STARTED

1. Set the dialling mode to the correct mode according to the directions from your local telecom.
2. Apply for the caller ID service from your local telecom operator.
3. Connect the handset and the unit with the coil cord supplied.
4. The unit requires 3 × 1.5V AA batteries (not included). Open the battery compartment cover and insert the
batteries in the right polarity. (use alkali batteries). The time will automatically display on the LCD screen.
5. Insert one end of the line cord to the line jack of the base and the other end to the phone box..
FUNCTION AND OPERATION DESCRIPTION
Menu Setting
In on-hook or off-hook state, press the SET/ST key to enter the setting mode. The LCD will display: VIEW
MENU↓↑. Use the UP/+ or DOWN/- keys to select among different options. Once the option has been selected,
press the SET/ST key again to enter into its setting. After finishing adjusting the desired option, press the
SET/ST key again to confirm and move to another option. In order to change the parameters, always use the
UP/+ or DOWN/- keys. If you want to abort the settings at any time, press the BOOK/ ÷ key.
The settings for different options are shown in detail below:

Language setting

When the unit is on on-hook or off-hook state, press the SET/ST key and then press the UP/+ key once. The
LCD will display LANGUAGE. Press the SET/ST key and you will see ESPAÑOL flashing on the LCD. Use the
UP/+ or DOWN/- keys to modify the language option to English and then press the SET/ST key again to
confirm.
Area code setting
When the unit is on on-hook or off-hook state, press the SET/ST key and then press the UP/+ key twice. The
LCD will display SET AREA CODE. Press the SET/ST key and "-----" will appear on the LCD display. The first
dash '-' will be flashing. If you have already set area code, the LCD will display the area code you have set and
the first digit will flash. Use the UP/+ or DOWN/- keys to edit from 0~9 or - and then press the SET/ST key
again to confirm. Proceed as above to set the rest. A maximum of 5 digits can be set.
Long distance code setting
When the unit is on on-hook or off-hook state, press the SET/ST key and then press the UP/+ key three times.
The LCD will display LONG DIST ACCESS. Press the SET/ST key and "0----" will appear on the LCD display.
The first dash '0' will be flashing. If you have already set a long distance code, the LCD will display the digit
you set and the first digit will flash. Use the UP/+ or DOWN/－ keys to edit from 0~9 or - and then press
SET/ST key again to confirm. Proceed as above to set the rest. A maximum of 5 digits can be set.
PABX code setting
When the unit is on on-hook or off-hook state, press the SET/ST key and then press the UP/+ keys four times.
The LCD will display EXT. PREFIX. Press the SET/ST key and you will see "–" flashing on the LCD display.
Use the UP/+ or DOWN/－keys to edit from 0~9 or - and then press SET/ST key again to confirm.
–
'
11