HSM SECURIO P36 Instrucciones De Servicio página 13

Display Problem
Oil reser-
voir empty
Metal in
the paper
Display Function
Button lock
is activated
Notes
Manual reversing
If you press the reverse button, the cutting unit runs
in reverse and switches off after 2 seconds, even if
you keep the button pressed. To reverse manually,
release the button and press it again.
If the shredder is already running forward, pressing
the button immediately reverses it.
Shredded material container
If either the paper or CD container is full, both cut-
ting units stop.
The number of CDs and credit cards fed to the ma-
chine is recorded. After 30 CDs or credit cards are
cut, the machine switches off and there is a signal.
The counter is automatically reset if the door is open
for longer than 5 seconds. In addition, a light barrier
monitors for blockages on the material chute.
0906
Measure
• Fill the reservoir with cutting apparatus oil.
1
2
• Press the reverse button and pull the paper put of the feed slot.
• Remove the paper clip and shred the paper again.
Activate/deactivate
To activate or deactivate the button lock
• Press and hold the reverse button
• Press the on/off button
• Release the on/off button and then the reverse button
Only use HSM special oil.
Reservoir volume: 250 ml
Press the safety element and lift up the fl ap.
The oil fi lling opening is to the right of the feed chute.
You can fi ll the oil either through the small opening
1 (take out the yellow plug) or the normal opening 2
(unscrew the red cap).
Automatic oiler (cross cut only)
The cutting units are oiled for 1.5 seconds after:
• The cutting unit is in operation for 200 seconds
(corresponding to 50 paper shreds)
• The cutting unit runs forwards after the reverse
button has been pressed
The "Oil reservoir empty" signal is automatically
deactivated after the reservoir is fi lled. The shredder
remains operational even when the oil reservoir is
empty.
Metal detection (optional)
To prevent paper clips from damaging the cutting
unit, the machine is equipped with a metal detection
system.
13