HSM SECURIO P36 Instrucciones De Servicio página 12

Ocultar thumbs Ver también para SECURIO P36:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
Fault and function indicators
Display
Problem
Paper jam
Overload
Continu-
ous lamp
Paper and
Flashes
CD fed at
the same
time
Paper/
shredded
material
Continu-
container
ous lamp
full
Flashes
CD con-
tainer full
Door or
safety ele-
ment open
12
Measure
You have fed in too much paper.
 The cutting unit runs in reverse for a few seconds and pushes the paper
back out again.
• If necessary, press the reverse button "R" to remove the stack of paper.
• Take half the stack of paper.
• Feed the paper in portions.
Note:
You can lift up the safety element in order to better remove paper. To do
this, press the middle section of the front of the safety element and lift up
the fl ap.
Note:
This indicator lamp also lights up when the motor is overloaded. In this
case, let the shredder cool down for 20 minutes before using it again.
• Destroy paper and CDs/credit cards separately.
• Empty the paper/shredded material container.
Note:
If you press the reverse button briefl y before opening the door, part of the
material is pulled back into the cutting apparatus.
• Empty the CD container.
• Close the door or latch in the safety element.
0906
Tabla de contenido
loading

Tabla de contenido