IBCONNECT DUPLO KIT Manual De Usuario página 7

User Manual
05
1
06
07
voice and data cable
08
Once the cables have been inserted inside the
profile, you can screw the duplo kit to the wall.
To do this, position the duplo kit so that the
holes in the wall line up with the anchor holes
in the profile. Once the screw heads pass
through the anchor holes, move the profile to
one side so that when the screw is tightened,
2
it sits on the narrow part of the profile anchor
hole.
CONNECTING THE ELECTRIC PART
The cables that you have inserted at the back
of the profile must be connected to the terminal
inside the profile, matching the colour of the
cables with those already connected. Phase,
Earth and Neutral. If the profile has a regulated
power supply, there will be separate terminals
for these connections.
.
CONNECTING VOICE AND DATA
The data cables you have inserted at the back
of the profile must be connected to the voice
and data connectors, as shown in diagram 7.
A
Now you must place the cover of the anchor
system and connection system.
For any queries related to the product, contact:
[email protected]
05-06
ES
EN