User Manual; Wall Mount; Making The Connections - IBCONNECT DUPLO KIT Manual De Usuario

User Manual

01
02
03
1
04
Electric
Data
2

WALL MOUNT

Insert a flathead screwdriver in the slots on the
side of the covers indicated in the diagram to
lever them off.
To remove the voice and data cover, use the
screwdriver as a lever at the top of it.
Once you have removed the covers, you can Once you have removed the covers, you can
access the inside of the profile. Mark the centre access the inside of the profile. Mark the centre
of the holes in order to later fix it to the wall. of the holes in order to later fix it to the wall.
The holes where the profile will be fixed are The holes where the profile will be fixed are
indicated in diagram 2. indicated in diagram 2.
After marking them, drill the holes. Then insert
the rawlplugs in the holes made. The next step
is to screw the screws inside the rawlplugs
without fully tightening them.

MAKING THE CONNECTIONS

Before fixing the duplo kit to the wall, you must
insert the cables that come from the connection
panel on the wall through the cable channel at
the back of the duplo kit. One is for the electric
cable and the other is for the data cable.
ES EN