Arregui FORMA Manual De Instrucciones Y Garantías página 3

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
<EN>
1. OPENING FOR THE FIRST TIME:
When opening the safe for the first time, proceed in the following manner:
• Remove the knob and insert the emergency key (which can be found insi-
de the envelope) into the lock.
• Turn the key to the right (clockwise)
• Insert the lever (which can be found inside the envelope) into the knob
shaft, lining up the flat part of the shaft with the lever.
• Turn the lever to the right (clockwise) and pull it to open the door.
In order to function, the safe needs 4 x 1.5 V alkaline batteries that are
placed in the battery holder located at the back of the door. In order to
insert them, open the cover of the battery holder and place the batteries
according to the diagram that is found on the inside. On completion of this
process the electronic system will be activated.
To close the safe, follow these steps:
• Turn the emergency key in a counter-clockwise direction and remove it.
• Remove the lever and place the knob, lining up the flat part of the shaft
with the knob.
• Turn the knob in a counter-clockwise direction.
2. OPENING AND CLOSING THE SAFE:
• Press the key. A green light will begin to flash (if it is red, see point:
6. "Condition of the battery indicator").
• Enter your personal opening code (1 2 3 4 if it is being opened for the
first time). The light will continue to flash.
• Press the key and turn the knob to the right (clockwise). If the en-
tered code is correct, the light will be illuminated continuously for 3
seconds and a long beep for acceptance will sound; you have this time
to turn the knob and open the safe. If the entered code is incorrect,
4 short deep sounding beeps will sound and the light will go out. In this
event, repeat the process. The safe will allow up to 5 incorrect code
entries before becoming blocked for 15 minutes as a security measure,
during which it will emit a beep every 5 seconds. During this time it is
not possible to use the keypad.
To close the safe, simply turn the knob to the left (anti-clockwise).
Tabla de contenido
loading

Tabla de contenido