Arregui FORMA Manual De Instrucciones Y Garantías página 2

<EN>
• In order to open the safe for the first time, see point:
1. "Opening for the first time".
• For subsequent openings of the safe, enter an opening code and then
turn the knob. Initially the programmed code is 1 2 3 4.
To discover how to open and close the safe, see point:
2. "Opening and closing the safe".
• For security reasons, it is important to change the initial code and
introduce a personal number decided by you. The new code can have
1 to 12 digits.
To discover how to change the code, see point:
3. "Changing the opening code".
• If any anomaly occurs, if the batteries go flat for example, the safe has
an emergency key and an external battery charger that will solve the
problem.
See point: 4. "Emergency opening" and 5. "Use of the external
battery charger".
In any case, in order to avoid the batteries going flat, see point:
6. "Condition of the battery indicator".
• Do not remove the identification sticker with the safe number that
you will find on the front of the safe and at the beginning of these
instructions, since you will need it in order to request emergency ope-
nings, spare parts etc.
WARNING:
Each time a key is pressed, the safe emits a short beep, which
means that it was pressed correctly. If more than 15 seconds
pass between pressing two keys, the safe will close.
In this event, repeat the process.
INSTRUCTIONS
3
2
1
6
5
4
9
8
7
0
1 2
4 5
7 8
0
3
6
9