Maintenance And Cleaning - 1 BY ONE 471NA-0010 Manual De Instrucciones

3. After opened, it will come to the following menu, click "YES" to go to "Llame_enc.dll",
EN
and find the file's location.
DE
FR
ES
IT
4. After you find the "lame_enc.dl" file, open it and click "Y" to finish the installation.
14

Maintenance and Cleaning

NOTE: Disconnect the power cable plug from the outlet as a precaution before
maintenance.
Turntable Body
Your turntable requires little of no regular maintenance. Remove dust with a slightly
damp antistatic cloth. Never use a dry cloth, this will create static electricity and attract
more dust! Antistatic cleaning agents are available at specialist stores, but must be
applied sparingly to avoid damage to rubber parts. It is recommended to install the
needle cover before cleaning or maintenance is carried out to avoid damage.
• Do not use benzenes, thinners, etc.
• When storing the turntable for a long time, the drive belt should be removed to
prevent unequal stretching.
Useful Tips
The turntable should be positioned on a low-resonance surface such as wood or
multiple layer ply board to avoid structural vibrations disturbing playback.
Stylus tip
• If dirt and grime are stuck to the stylus tip, clean it
with a commercially sold brush.
• We recommend using a stylus cleaner (not
included) if the stylus tip is considerably dirty.
Clean the stylus tip by moving the brush from the
rear to the front of the stylus tip.
Replacing the Stylus
Removing the Stylus
• In addition to the deterioration of sound quality, records may also be damaged as
the cartridge's stylus tip wears down.
• As a rule of thumb, replace the stylus after 300 to 500 hours of use.
• Be sure to disconnect the product's power cable plug from the outlet.
1. Remove the protector from the cartridge.
2. Remove the stylus by pulling in the direction
of the arrow.
15
EN
DE
FR
ES
IT