Tabla de contenido
REMARK : AS SOME KIND OF RECORD THE AUTO-STOP AREA WAS OUT OF THE UNIT SETTING, SO IT WILL
STOP BEFORE THE LAST TRACK FINISHES. IN THIS CASE, SELECT THE AUTO-STOP SWITCH TO " OFF
" POSITION, THEN IT WILL RUN TO THE END OF THE RECORD BUT WILL NOT STOP AUTOMATICALLY (TURN
OFF THE UNIT BY POWER BUTTON OR SWITCH BACK THE AUTO-STOP SWITCH TO " ON " POSITION TO
STOP THE PLATTER ROTATE). THEN PUT BACK THE TONE ARM TO THE ARM PARK.
PHONO ENCODING
8.
PRESS FUNCTION BUTTON TO SELECT "PHON" ON DISPLAY
9.
INSERT MEMORY DEVICE (USB DRIVE, SD OR MMC CARD)
10. PRESS THE REC BUTTON, THEN USB OR SD ICON WILL BE FLASHING.
11. PRESS SKIP UP
FOR ENCODING. THEN PRESS THE REC BUTTON AGAIN TO CONFIRM. AND THE SYSTEM IS STARTING
THE ENCODING MODE AFTER FEW SECONDSS.
12. IF ONLY USB DRIVE, SD OR MMC CARD IS INSERTED, STEP 4 CAN BE SKIPPED.
13. THE "REC" WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.
14. TO FINISH ENCODING:
PRESS STOP
TURNTABLE WILL STOP OPERATION. PRESS REC BUTTON AGAIN, ENCODING AND TURNTABLE
WILL RESUME TO WORK.
PRESS AND HOLD REC BUTTON CONTINUOUSLY, "REC" WILL DISAPPEAR, RECORDING WILL
STOP OPERATION, BUT TURNTABLE WILL KEEP OPERATION. PRESS REC BUTTON AGAIN,
ENCODING WILL RESUME TO WORK.
15. TO HEAR NEWLY ENCODED TRACK:
PRESS FUNCTION BUTTON TO SELECT USB OR SD MODE.
PRESS SKIP UP
TRACK.
THE NEWLY ENCODED TRACK IS ALWAYS STORED AS THE LAST TRACK IN USB/SD.
DURING PLAYBACK FROM USB OR SD, PRESS REC BUTTON TO SWITCH BETWEEN TRACKS
ENCODED BY THIS UNIT OR OTHER TRACKS STORED IN THE USB (OR SD) ORIGINALLY.
REMARK:-
-
THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE PHONO
-
THE RECORDING FORMAT IS PRESET AT – MP3
AUX IN JACK & ENCODING
PRESS FUNCTION BUTTON TO SELECT "AUX" ON DISPLAY, THEN CONNECT THE EXTERNAL AUDIO DEVICE
(SUCH AS CD PLAYER) THROUGH THE AUX IN JACK. AUDIO SIGNAL FROM THE EXTERNAL AUDIO DEVICE
CAN BE PLAYED THROUGH THE SYSTEM.
AUX IN ENCODING
7.
PRESS FUNCTION BUTTON TO SELECT AUX MODE
8.
INSERT MEMORY DEVICE (USB DRIVE, SD OR MMC CARD)
9.
PRESS THE REC BUTTON, THEN USB OR SD ICON WILL BE FLASHING.
10. PRESS SKIP UP
FOR ENCODING. THEN PRESS THE REC BUTTON AGAIN TO CONFIRM. AND THE SYSTEM IS STARTING
THE ENCODING MODE AFTER FEW SECONDSS.
11. IF ONLY USB DRIVE, SD OR MMC CARD IS INSERTED, STEP 4 CAN BE SKIPPED.
12. THE "REC" WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.
13. TO FINISH ENCODING, PRESS STOP
14. TO HEAR NEWLY ENCODED TRACK:
PRESS FUNCTION BUTTON TO SELECT USB OR SD MODE.
PRESS SKIP UP
TRACK.
THE NEWLY ENCODED TRACK IS ALWAYS STORED AS THE LAST TRACK IN USB/SD.
DURING PLAYBACK FROM USB OR SD, PRESS REC BUTTON TO SWITCH BETWEEN TRACKS
ENCODED BY THIS UNIT OR OTHER TRACKS STORED IN THE USB (OR SD) ORIGINALLY.
BUTTON OR SKIP DOWN
BUTTON OR REC BUTTON, "REC" WILL DISAPPEAR, RECORDING AND
BUTTON OR SKIP DOWN
BUTTON OR SKIP DOWN
BUTTON OR REC BUTTON , "REC" WILL DISAPPEAR.
BUTTON OR SKIP DOWN
BUTTON TO SELECT DESIRED MODE (USB OR SD)
BUTTON TO SELECT THE NEWLY ENCODED
BIT RATE : 128 KBPS
BUTTON TO SELECT DESIRED MODE (USB OR SD)
BUTTON TO SELECT THE NEWLY ENCODED
ž‰‹ƒ
Tabla de contenido
