Use And Cleaning Information; Control Descriptions - Fimar MSD300P Manual De Uso

Control descriptions

MSD300P-300-400-500:
2) Start up push-button
Press the push-button with the
providing voltage to the machine (the presence of
voltage is highlighted by the message "Welcome",
that appears on the display). After completing the
working cycle, pressing the
the machine to shutdown and the word "Goodbye"
will appear on the display.
2) SET push-button
SET push-button:
a) if pressed before the "Welcome" message
disappears, it allows you to select the language of
operation of the machine, using the + and – push-
buttons (see point 3):
- Lan0 = Italian
- Lan1 = English
- Lan2 = Spanish
- Lan3 = German
- Lan4 = French
b) if pressed after the
disappears, the temperature can be regulated from
Level 0 to Level 10 (Level 4 is recommended). After
selecting the temperature level press the SET push-
button once again to save the information.
3) Push-button to regulate sachet sealing
The + and – push-buttons allow the temperature
level to be set (perform the operation after pressing
the SET push-button as shown in point 1b).
4) MODE push-button
Press the MODE push-button to set up your desired
working situation:
- Automatic (automatic operating cycle)
- Manual (manual operating cycle)
- Suction Only (operate only the suction cycle)
5) SEAL/PUMP push-button
In "Manual" operation mode, press the SEAL/PUMP
push-button at the end of the suction cycle to begin
the process of sealing the sachet (perform this
operation only after having set the temperature
level).
In "Suction Only" operation mode, press the
SEAL/PUMP push-button to begin the external
suction cycle.
symbol to begin
push-button will cause
"Welcome" message
USE AND CLEANING
INFORMATION
1 2
4
3
3 5
3