HETAL FB-1-D Instrucciones De Montaje página 20

GB
Wooden flaps
View of inside of flap
The fixing bracket can be used for solid wood
flaps and frame flaps (frame width: from 20
mm + overlay).
The right hand fixing bracket is marked with
R, the left hand fixing bracket with L.
(View of outside of flap)
Fasten fixing bracket to the inside of the flap
with round head chipboard screws, 4 mm
diam., min. 13 mm long, as shown in drawing
on page 17.
The clip bolt must always point into the
inside of the cabinet!
Aluminium frame flaps with glass panel
View of inside of flap
The fixing bracket can be used for standard
aluminium frame flaps (19 mm) and overlays
of 12 to 17 mm.
The right hand fixing bracket is marked with
R, the left hand fixing bracket with L.
(View of outside of flap)
Fasten fixing bracket to the inside of the flap
with M4 screws with round head, as shown in
drawing on page 18.
The clip bolt must always point into the
inside of the cabinet!
Please use the table below to select the right
fixing bracket for your purposes:
Fixing bracket for aluminium frame
flaps with glass panel
Fixing bracket Marking*
1 12–14
2 15–17
*The marking is on the outer side of the fixing bracket
Attaching fixing bracket
to lower flap
Overlay
12 to 14 mm
15 to 17 mm
20
Long side
of the fixing
bracket must
face up
Clip bolt
Long side of
the fixing
bracket must
face up
Clip bolt