Placement; Utilisation - Powerfix Profi KH 4179 Instrucciones De Uso

Placement

• Two retaining magnets
laser spirit level to secure the appliance onto steel surfaces.
• If you wish to use the tripod-stand
underside. Draw out the telesopic legs
• Align the laser spirit level at its desired location so that, in the two spirit
q
levels and
markings, the laser spirit level is then positioned exactly level in all direc-
tions. A ball and socket joint with retaining screw
on the tripod stand. To level out floor/ground irregularities, the telesopic
i
legs on the tripod stand can be drawn out to varying lengths.

Utilisation

Attention!!
This appliance contains a Class 2 laser. NEVER direct the laser beam
at people or animals.NEVER look directly into the laser beam.
• Press the On/Off switch
aligned in all directions, as described on Page 3
r
laser line on the wall it is directed at, a line which is level with the floor/
ground. If the laser spirit level is standing on a level floor/the ground with-
out the tripod stand, the vertical distance of the laser line from the base
level amounts to 29,5 mm.
• Press the On/Off switch
light conditions the spirit levels
• For simple length measurements a measuring scale
side of the laser spirit level.
o
have been integrated on the underside of the
w
, the air bubbles lie precisely between their respective
r
for the laser. When the appliance is correctly
e
for the spirit level illumination. In darkened
i
, screw these firmly onto the appliance
i
.
q w
and now glow lightly.
- 30 -
u
is available for this
, there now appears a red
4
y
is printed onto the